3 Ft. DMX XLR3-M to XLR3-F Premium Cable

Overview

Introducing the ProX XCP-DMX03 3 Ft. DMX XLR3-M to XLR3-F Premium Cable, a dependable, purpose-built DMX cable made for lighting control applications where clean data transmission matters. Whether you are a mobile DJ setting up a weekend gig, a sound and lighting tech running fixtures at a club install, or a venue technician managing a permanent fixture rig, the ProX XCP-DMX03 delivers the signal integrity DMX control demands at a price point that makes sense for builds that need reliable coverage across the board.

Purpose-Built for DMX Control DMX is a data protocol, not an audio signal, and that distinction matters more than most people realize. Standard audio cables are not engineered for the 110-ohm impedance that DMX requires, and using the wrong cable in a DMX chain introduces noise, signal degradation, and unpredictable fixture behavior. The ProX XCP-DMX03 is designed specifically for DMX applications, with the correct electrical characteristics to keep your lighting data clean from controller to fixture.

OFC Conductors and Braided Shield At the core of the XCP-DMX03 are 22 AWG oxygen-free copper (OFC) conductors paired with a braided OFC copper compact shield. The shielding is what keeps outside interference out and your DMX data intact, especially in environments where audio cables, power runs, and lighting rigs are all sharing the same physical space. A shielded cable in a noisy stage or venue environment is not optional, it is the difference between fixtures that respond and fixtures that flicker.

All-Metal XLR Connectors Both ends feature ProX branded, all-metal XLR connectors with silver plated contacts. The all-metal housing gives these connectors the durability to hold up through repeated connections and disconnections without loosening or cracking, and the silver plated contacts help maintain a consistent, low-resistance connection over time.

Built for Flexible, Lasting Use The XCP-DMX03 is constructed for durability and flexibility. It bends and twists without fatigue, which matters in real setups where cables get routed around truss, wrapped back into cases, and deployed again the next weekend. At 3 ft., it is the right length for tight console-to-controller connections, fixture daisy-chaining on a truss run, or any application where you need a short, clean link between two DMX points.

Practical Note on Compatibility Twisted pair DMX data transmission cables like the XCP-DMX03 are not interchangeable with audio cables. Their impedance, capacitance, and shielding characteristics differ substantially. Always use DMX-rated cable for DMX runs and audio-rated cable for audio runs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XCP-DMX05 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

NOTE: Twisted pair DMX data transmission cables are not suitable for audio use.  Conversely, audio cables are not suitable for DMX data use.   Their specifications and characteristics differ substantially.   Always use the correct cable for reliable connections!

• DMX-Specific Design: Engineered for DMX data transmission with 110-ohm nominal impedance, not an audio cable repurposed for DMX
• 22 AWG OFC Conductors: Oxygen-free copper conductors deliver clean DMX data transfer with minimal signal loss across the run
• Braided OFC Copper Shield: Compact braided shield blocks interference and protects data transmission in noisy stage environments
• All-Metal XLR Connectors: ProX branded, all-metal construction on both ends for long-term durability through repeated use
• Silver Plated Contacts: Corrosion-resistant silver plated contacts maintain a clean, consistent connection
• 3 Ft. Length: Ideal for short console-to-controller links, daisy-chaining fixtures on a truss run, or tight equipment rack connections
• Flexible, Durable Build: Designed to withstand repeated bending and twisting without jacket fatigue or connector failure
• XLR3-M to XLR3-F: Standard 3-pin male to female configuration for universal DMX device compatibility
• Not for Audio Use: Twisted pair DMX cable is not suitable for audio applications; always match cable type to protocol
• Master Box: 10 Cables
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

DMX XLR3-M to XLR3-F

Compatibility

DMX XLR3-M to XLR3-F

Product details

Introducing the ProX XCP-DMX03 3 Ft. DMX XLR3-M to XLR3-F Premium Cable, a dependable, purpose-built DMX cable made for lighting control applications where clean data transmission matters. Whether you are a mobile DJ setting up a weekend gig, a sound and lighting tech running fixtures at a club install, or a venue technician managing a permanent fixture rig, the ProX XCP-DMX03 delivers the signal integrity DMX control demands at a price point that makes sense for builds that need reliable coverage across the board.

Purpose-Built for DMX Control DMX is a data protocol, not an audio signal, and that distinction matters more than most people realize. Standard audio cables are not engineered for the 110-ohm impedance that DMX requires, and using the wrong cable in a DMX chain introduces noise, signal degradation, and unpredictable fixture behavior. The ProX XCP-DMX03 is designed specifically for DMX applications, with the correct electrical characteristics to keep your lighting data clean from controller to fixture.

OFC Conductors and Braided Shield At the core of the XCP-DMX03 are 22 AWG oxygen-free copper (OFC) conductors paired with a braided OFC copper compact shield. The shielding is what keeps outside interference out and your DMX data intact, especially in environments where audio cables, power runs, and lighting rigs are all sharing the same physical space. A shielded cable in a noisy stage or venue environment is not optional, it is the difference between fixtures that respond and fixtures that flicker.

All-Metal XLR Connectors Both ends feature ProX branded, all-metal XLR connectors with silver plated contacts. The all-metal housing gives these connectors the durability to hold up through repeated connections and disconnections without loosening or cracking, and the silver plated contacts help maintain a consistent, low-resistance connection over time.

Built for Flexible, Lasting Use The XCP-DMX03 is constructed for durability and flexibility. It bends and twists without fatigue, which matters in real setups where cables get routed around truss, wrapped back into cases, and deployed again the next weekend. At 3 ft., it is the right length for tight console-to-controller connections, fixture daisy-chaining on a truss run, or any application where you need a short, clean link between two DMX points.

Practical Note on Compatibility Twisted pair DMX data transmission cables like the XCP-DMX03 are not interchangeable with audio cables. Their impedance, capacitance, and shielding characteristics differ substantially. Always use DMX-rated cable for DMX runs and audio-rated cable for audio runs.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XCP-DMX05 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

NOTE: Twisted pair DMX data transmission cables are not suitable for audio use.  Conversely, audio cables are not suitable for DMX data use.   Their specifications and characteristics differ substantially.   Always use the correct cable for reliable connections!

Key features

• DMX-Specific Design: Engineered for DMX data transmission with 110-ohm nominal impedance, not an audio cable repurposed for DMX
• 22 AWG OFC Conductors: Oxygen-free copper conductors deliver clean DMX data transfer with minimal signal loss across the run
• Braided OFC Copper Shield: Compact braided shield blocks interference and protects data transmission in noisy stage environments
• All-Metal XLR Connectors: ProX branded, all-metal construction on both ends for long-term durability through repeated use
• Silver Plated Contacts: Corrosion-resistant silver plated contacts maintain a clean, consistent connection
• 3 Ft. Length: Ideal for short console-to-controller links, daisy-chaining fixtures on a truss run, or tight equipment rack connections
• Flexible, Durable Build: Designed to withstand repeated bending and twisting without jacket fatigue or connector failure
• XLR3-M to XLR3-F: Standard 3-pin male to female configuration for universal DMX device compatibility
• Not for Audio Use: Twisted pair DMX cable is not suitable for audio applications; always match cable type to protocol
• Master Box: 10 Cables
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.