2 ft Low Profile XLR Female to Male Patch Cable 10 Pack with Color Coded Caps

Overview

ProX features the ProX XC-XLRLP02X10 2 ft Low Profile XLR Audio Performance Cable 10 Pack. Standard XLR plugs stick straight out from the back of your gear, and in a packed rack, a tight case, or a crowded stage box that gets ugly fast. Cables bend hard against lids and doors, jacks take extra strain, and tracing one signal through a tangle of identical black cables slows you down when something needs to change mid-show. This 10 pack fixes all of that. You get ten 2 ft cables, each with a low profile female XLR on one end and a low profile male XLR on the other, so your patching sits close to the gear, stays neat, and is easy to read at a glance.

Ten 2 ft Cables in One Pack Each package holds ten complete cables, giving you 10 female XLR ends and 10 male XLR ends in total. That’s enough to patch a full rack of processors, wire a mixer to its stage box, or set up a whole row of short jumpers from one pack. Two feet is the sweet spot for rack work, long enough to reach the next unit and short enough that there’s no slack to coil and hide.

Low Profile XLR Connectors The cable exits from the side of the connector instead of straight out the back, so each plug takes up far less depth behind your gear. That means rack cases close without crushing cables, wall mounted and pole mounted speakers sit closer to the wall or stand, and stage boxes stay tidy. With less connector hanging off the jack, there’s also less leverage on the input when a cable gets bumped during load in or a busy show.

Color Coded End Caps Every connector wears a colored end cap, with a mix of colors like orange, blue, yellow, green, red, and gray across the pack. Assign a color to each channel or each device and you can find the right cable in seconds, even in a dim booth or a crowded rack. It also makes resets and teardown faster, because the crew can match cables to inputs without reading labels.

Locking Female Connectors The female ends use a latching design with a release tab, so they hold firmly on male inputs and outputs and won’t wiggle loose from vibration in a rolling rack or on a shaking stage. When it’s time to pull a cable, press the tab and it comes right out.

Gold Finish Contacts The male connectors have gold finish pins, giving each cable a clean, professional connection point on your interfaces, mixers, and processors.

Where It Fits Best The ProX XLRLP02X10 is made for rack builders, FOH and monitor engineers, mobile DJs, AV integrators, studios, and houses of worship. It pairs perfectly with ProX rack cases and ProX stage boxes, where short, low profile runs make the biggest difference. For runs other than 2 ft, the ProX XC-XLR24LP50FT DIY bundle lets you build low profile XLR cables to the exact length you need.

Bundled and Ready to Go The pack arrives bundled with a ProX hook and loop strap, so the set stays together in your gig bag or case until you need it.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XLRLP02X10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 10 Pack of 2 ft XLR Cables Ten complete cables in one package
• Female XLR to Male XLR 10 female ends and 10 male ends per pack
• Low Profile Connectors Side exit design saves depth behind racks, cases, and speakers
• Less Strain on Jacks Less connector sticking out means less leverage on inputs
• Color Coded End Caps Multiple cap colors for quick channel and device identification
• Locking Female Connectors Latch with release tab holds cables in place
• Gold Finish Contacts Clean connection point on the male pins
• Ideal Rack Patch Length 2 ft reaches the next unit with no extra slack
• ProX Hook and Loop Strap Keeps the pack bundled for storage and transport
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

ProX features the ProX XC-XLRLP02X10 2 ft Low Profile XLR Audio Performance Cable 10 Pack. Standard XLR plugs stick straight out from the back of your gear, and in a packed rack, a tight case, or a crowded stage box that gets ugly fast. Cables bend hard against lids and doors, jacks take extra strain, and tracing one signal through a tangle of identical black cables slows you down when something needs to change mid-show. This 10 pack fixes all of that. You get ten 2 ft cables, each with a low profile female XLR on one end and a low profile male XLR on the other, so your patching sits close to the gear, stays neat, and is easy to read at a glance.

Ten 2 ft Cables in One Pack Each package holds ten complete cables, giving you 10 female XLR ends and 10 male XLR ends in total. That’s enough to patch a full rack of processors, wire a mixer to its stage box, or set up a whole row of short jumpers from one pack. Two feet is the sweet spot for rack work, long enough to reach the next unit and short enough that there’s no slack to coil and hide.

Low Profile XLR Connectors The cable exits from the side of the connector instead of straight out the back, so each plug takes up far less depth behind your gear. That means rack cases close without crushing cables, wall mounted and pole mounted speakers sit closer to the wall or stand, and stage boxes stay tidy. With less connector hanging off the jack, there’s also less leverage on the input when a cable gets bumped during load in or a busy show.

Color Coded End Caps Every connector wears a colored end cap, with a mix of colors like orange, blue, yellow, green, red, and gray across the pack. Assign a color to each channel or each device and you can find the right cable in seconds, even in a dim booth or a crowded rack. It also makes resets and teardown faster, because the crew can match cables to inputs without reading labels.

Locking Female Connectors The female ends use a latching design with a release tab, so they hold firmly on male inputs and outputs and won’t wiggle loose from vibration in a rolling rack or on a shaking stage. When it’s time to pull a cable, press the tab and it comes right out.

Gold Finish Contacts The male connectors have gold finish pins, giving each cable a clean, professional connection point on your interfaces, mixers, and processors.

Where It Fits Best The ProX XLRLP02X10 is made for rack builders, FOH and monitor engineers, mobile DJs, AV integrators, studios, and houses of worship. It pairs perfectly with ProX rack cases and ProX stage boxes, where short, low profile runs make the biggest difference. For runs other than 2 ft, the ProX XC-XLR24LP50FT DIY bundle lets you build low profile XLR cables to the exact length you need.

Bundled and Ready to Go The pack arrives bundled with a ProX hook and loop strap, so the set stays together in your gig bag or case until you need it.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XLRLP02X10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 10 Pack of 2 ft XLR Cables Ten complete cables in one package
• Female XLR to Male XLR 10 female ends and 10 male ends per pack
• Low Profile Connectors Side exit design saves depth behind racks, cases, and speakers
• Less Strain on Jacks Less connector sticking out means less leverage on inputs
• Color Coded End Caps Multiple cap colors for quick channel and device identification
• Locking Female Connectors Latch with release tab holds cables in place
• Gold Finish Contacts Clean connection point on the male pins
• Ideal Rack Patch Length 2 ft reaches the next unit with no extra slack
• ProX Hook and Loop Strap Keeps the pack bundled for storage and transport
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.