3' FT, 12AWG Jumper Power, CAT6, and XLR TR1 Jumper Link Cable

Overview

Introducing the ProX XC-TR112-XLRCAT6-03 3' FT, 12AWG Jumper Power, CAT6, and XLR TR1 Jumper Link Cable, a single run replacing three separate cable pulls on any stage or in any rig. Anyone who has walked a stage before doors knows the tangle: one line for power, another for audio, a third for network data, each taped down on its own and each one more thing that can trip a crew member or get kicked loose mid show. The ProX TR112 solves that by combining a PowerKon TR1 power connector, an XLR 3 pin audio connector, and a shielded CAT6 data line into one 3 foot jumper, so techs can drop a single cable and move on.

Triple connection design Each end of the ProX TR112 carries a PowerKon TR1 connector, an XLR 3 pin audio connector, and a CAT6 connector side by side, letting power, analog audio, and network data travel together in one jumper instead of three separate runs.

12 AWG conductor with braided shield The power and audio conductors are built on 12 AWG wire, wrapped in a 94% braided OFC copper shield that keeps noise out and protects clean audio signal transfer at every connection point.

Compact cable diameter A tighter overall cable diameter helps cut down on eddy currents that can otherwise degrade signal quality, so the ProX TR112 stays quiet even when run alongside other power and data lines.

Tour grade construction Built to handle the bending and twisting that comes with load in, show, and load out night after night, the ProX TR112 is made for repeated use on the road, not a one time install.

3 foot jumper length This length is built for short connection points, patch runs between adjacent gear, or tight spaces where a longer cable would only add clutter. It is also available in 5 foot and 10 foot versions for longer reaches.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX TR112 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

• Triple PowerKon TR1, XLR, and CAT6 connection Combines power, audio, and network data through a single jumper on each end.
• 12 AWG power and audio conductors Sized to handle demanding power and audio loads under sustained show use.
• 94% braided OFC copper shield Reduces noise and protects clean audio signal transfer at every connection.
• Compact cable diameter Helps minimize eddy currents that can degrade signal quality.
• Extra durable, flexible construction Built to withstand the bending and twisting of repeated load in and load out cycles.
• 3 foot jumper length Ideal for short connection points and tight patch runs; also available in 5 foot and 10 foot lengths.
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

Introducing the ProX XC-TR112-XLRCAT6-03 3' FT, 12AWG Jumper Power, CAT6, and XLR TR1 Jumper Link Cable, a single run replacing three separate cable pulls on any stage or in any rig. Anyone who has walked a stage before doors knows the tangle: one line for power, another for audio, a third for network data, each taped down on its own and each one more thing that can trip a crew member or get kicked loose mid show. The ProX TR112 solves that by combining a PowerKon TR1 power connector, an XLR 3 pin audio connector, and a shielded CAT6 data line into one 3 foot jumper, so techs can drop a single cable and move on.

Triple connection design Each end of the ProX TR112 carries a PowerKon TR1 connector, an XLR 3 pin audio connector, and a CAT6 connector side by side, letting power, analog audio, and network data travel together in one jumper instead of three separate runs.

12 AWG conductor with braided shield The power and audio conductors are built on 12 AWG wire, wrapped in a 94% braided OFC copper shield that keeps noise out and protects clean audio signal transfer at every connection point.

Compact cable diameter A tighter overall cable diameter helps cut down on eddy currents that can otherwise degrade signal quality, so the ProX TR112 stays quiet even when run alongside other power and data lines.

Tour grade construction Built to handle the bending and twisting that comes with load in, show, and load out night after night, the ProX TR112 is made for repeated use on the road, not a one time install.

3 foot jumper length This length is built for short connection points, patch runs between adjacent gear, or tight spaces where a longer cable would only add clutter. It is also available in 5 foot and 10 foot versions for longer reaches.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX TR112 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Triple PowerKon TR1, XLR, and CAT6 connection Combines power, audio, and network data through a single jumper on each end.
• 12 AWG power and audio conductors Sized to handle demanding power and audio loads under sustained show use.
• 94% braided OFC copper shield Reduces noise and protects clean audio signal transfer at every connection.
• Compact cable diameter Helps minimize eddy currents that can degrade signal quality.
• Extra durable, flexible construction Built to withstand the bending and twisting of repeated load in and load out cycles.
• 3 foot jumper length Ideal for short connection points and tight patch runs; also available in 5 foot and 10 foot lengths.
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.