10' Ft Dual 14AWG Powerkon to Dual DMX Combo Link Jumper Cable

Overview

Featuring the ProX XC-PWC14-DMX10 10' Dual 14AWG PowerKon to Dual DMX Combo Link Jumper Cable, the long-reach solution for professional lighting rigs that need power and DMX control delivered together across a real distance. Short jumpers handle the tight spacing. The ProX XC-PWC14-DMX10 handles everything else. At 10 feet, it gives you the run length to reach fixtures spaced further apart on a truss section, bridge from a distro point to a fixture cluster across an upstage wing, or manage the first leg of a longer daisy chain without splicing in extra cable. Every foot of that run is built the same way: dual locking PowerKon connectors and dual 3-pin XLR DMX connectors on each end, combined into a single organized cable that cuts your fixture cable count in half and keeps the rig clean.

Cable Construction and Conductor Design

The ProX XC-PWC14-DMX10 uses a dual-conductor design matched to the demands of each signal it carries. Power runs through 14AWG oxygen-free copper conductors, appropriately gauged for the current draw of professional lighting fixtures without generating heat in a bundled cable run. DMX control travels through 20AWG OFC conductors optimized for the low-capacitance, stable signal path that DMX512 requires across a daisy chain of fixtures. At 10 feet, proper conductor sizing and quality OFC construction are even more important than on a short jumper, since signal degradation and heat buildup have more cable length to develop.

Shielding and Noise Rejection

The ProX XC-PWC14-DMX10 uses dual-layer shielding: a tinned copper braid at 85% coverage paired with a Duofoil® layer at 100% coverage. That combination addresses interference from two directions. The foil provides complete, continuous coverage against high-frequency RF interference, while the braid adds physical robustness and handles lower-frequency noise rejection. A polyethylene inner jacket further isolates the conductors from each other inside the cable body. In a live production environment with dimmer racks, wireless systems, and switching power supplies all operating nearby, that level of shielding keeps your DMX signal stable and your lighting cues precise.

Jacket and Build Quality

The outer jacket is black PVC, durable and flexible enough to handle the demands of touring use while staying low-profile on stage. The compact cable diameter reduces eddy currents that degrade performance in multi-conductor cables. At 10 feet, the ProX XC-PWC14-DMX10 needs to hold up through repeated coiling and uncoiling, exposure to stage heat, and the handling that comes with every load-in and strike. The construction is built for exactly that.

Connector Specifications

Each end of the ProX XC-PWC14-DMX10 terminates in two PowerKon locking power connectors and two 3-pin XLR DMX connectors. The PowerKon is a 3-conductor twist-lock connector that sequences the ground contact before neutral and line, which is the correct order for safe live power connections. It is the standard across professional powered lighting fixtures, amplified loudspeakers, and production power distribution equipment worldwide. The 3-pin XLR DMX connectors provide full DMX512 compatibility across the professional lighting fixture market.

Length and Application

Ten feet is where this cable earns its place in a well-stocked cable kit. It covers the spacing between fixtures on a wider truss span, the run from a distro box mounted on a side boom to a fixture a few steps away, or the longer jumps that come up in installed and architectural lighting work. Having the 10-foot length available alongside 3-foot and 5-foot variants means you can match the cable to the gap instead of leaving excess bundled at the fixture or falling short and improvising.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC14-DMX10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Combo jumper design combines dual PowerKon power connectors and dual 3-pin XLR DMX connectors on each end into a single 10-foot cable run, replacing two separate lines to every fixture
• 14AWG OFC power conductors correctly gauged for professional lighting fixture current demands across a longer run
• 20AWG OFC DMX conductors engineered for stable, low-capacitance DMX512 signal transmission
• Dual-layer shielding with 85% tinned copper braid plus Duofoil® at 100% coverage for reliable noise rejection in busy production environments
• Polyethylene inner jacket isolates conductors from each other within the cable body
• Black PVC outer jacket for durability, flexibility, and low stage visibility
• Compact cable diameter reduces eddy currents in the multi-conductor build
• PowerKon locking connectors sequence ground contact before neutral and line for safe live power connections
• 3-pin XLR DMX connectors on each end for standard DMX512 compatibility across professional lighting fixtures
• 10-foot length suited for wider fixture spacing on truss, longer distro-to-fixture runs, and applications where shorter jumpers fall short
• Master box quantity: 10 pcs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Dual PowerKon to Dual DMX 3-PIN

Compatibility

Dual PowerKon to Dual DMX 3-PIN

Product details

Featuring the ProX XC-PWC14-DMX10 10' Dual 14AWG PowerKon to Dual DMX Combo Link Jumper Cable, the long-reach solution for professional lighting rigs that need power and DMX control delivered together across a real distance. Short jumpers handle the tight spacing. The ProX XC-PWC14-DMX10 handles everything else. At 10 feet, it gives you the run length to reach fixtures spaced further apart on a truss section, bridge from a distro point to a fixture cluster across an upstage wing, or manage the first leg of a longer daisy chain without splicing in extra cable. Every foot of that run is built the same way: dual locking PowerKon connectors and dual 3-pin XLR DMX connectors on each end, combined into a single organized cable that cuts your fixture cable count in half and keeps the rig clean.

Cable Construction and Conductor Design

The ProX XC-PWC14-DMX10 uses a dual-conductor design matched to the demands of each signal it carries. Power runs through 14AWG oxygen-free copper conductors, appropriately gauged for the current draw of professional lighting fixtures without generating heat in a bundled cable run. DMX control travels through 20AWG OFC conductors optimized for the low-capacitance, stable signal path that DMX512 requires across a daisy chain of fixtures. At 10 feet, proper conductor sizing and quality OFC construction are even more important than on a short jumper, since signal degradation and heat buildup have more cable length to develop.

Shielding and Noise Rejection

The ProX XC-PWC14-DMX10 uses dual-layer shielding: a tinned copper braid at 85% coverage paired with a Duofoil® layer at 100% coverage. That combination addresses interference from two directions. The foil provides complete, continuous coverage against high-frequency RF interference, while the braid adds physical robustness and handles lower-frequency noise rejection. A polyethylene inner jacket further isolates the conductors from each other inside the cable body. In a live production environment with dimmer racks, wireless systems, and switching power supplies all operating nearby, that level of shielding keeps your DMX signal stable and your lighting cues precise.

Jacket and Build Quality

The outer jacket is black PVC, durable and flexible enough to handle the demands of touring use while staying low-profile on stage. The compact cable diameter reduces eddy currents that degrade performance in multi-conductor cables. At 10 feet, the ProX XC-PWC14-DMX10 needs to hold up through repeated coiling and uncoiling, exposure to stage heat, and the handling that comes with every load-in and strike. The construction is built for exactly that.

Connector Specifications

Each end of the ProX XC-PWC14-DMX10 terminates in two PowerKon locking power connectors and two 3-pin XLR DMX connectors. The PowerKon is a 3-conductor twist-lock connector that sequences the ground contact before neutral and line, which is the correct order for safe live power connections. It is the standard across professional powered lighting fixtures, amplified loudspeakers, and production power distribution equipment worldwide. The 3-pin XLR DMX connectors provide full DMX512 compatibility across the professional lighting fixture market.

Length and Application

Ten feet is where this cable earns its place in a well-stocked cable kit. It covers the spacing between fixtures on a wider truss span, the run from a distro box mounted on a side boom to a fixture a few steps away, or the longer jumps that come up in installed and architectural lighting work. Having the 10-foot length available alongside 3-foot and 5-foot variants means you can match the cable to the gap instead of leaving excess bundled at the fixture or falling short and improvising.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC14-DMX10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Combo jumper design combines dual PowerKon power connectors and dual 3-pin XLR DMX connectors on each end into a single 10-foot cable run, replacing two separate lines to every fixture
• 14AWG OFC power conductors correctly gauged for professional lighting fixture current demands across a longer run
• 20AWG OFC DMX conductors engineered for stable, low-capacitance DMX512 signal transmission
• Dual-layer shielding with 85% tinned copper braid plus Duofoil® at 100% coverage for reliable noise rejection in busy production environments
• Polyethylene inner jacket isolates conductors from each other within the cable body
• Black PVC outer jacket for durability, flexibility, and low stage visibility
• Compact cable diameter reduces eddy currents in the multi-conductor build
• PowerKon locking connectors sequence ground contact before neutral and line for safe live power connections
• 3-pin XLR DMX connectors on each end for standard DMX512 compatibility across professional lighting fixtures
• 10-foot length suited for wider fixture spacing on truss, longer distro-to-fixture runs, and applications where shorter jumpers fall short
• Master box quantity: 10 pcs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.