5' Ft Dual 14AWG Powerkon to Dual DMX Combo Link Jumper Cable

Overview

Featuring the ProX XC-PWC14-DMX05 5' Dual 14AWG PowerKon to Dual DMX Combo Link Jumper Cable, the production-ready solution for getting both power and DMX control to your lighting fixtures in a single, organized run. Every professional lighting rig has the same problem: two cables going to every fixture, power and DMX side by side, multiplied across every moving head, LED wash, and effect unit on the rig. The  XC-PWC14-DMX05 cuts that in half. With dual locking PowerKon connectors and dual 3-pin XLR DMX connectors on each end, it replaces two separate runs with one and does it at a 5-foot length that gives you the reach to work comfortably between fixtures, distro boxes, and control nodes without excess cable pooling on the ground.

Cable Construction and Conductor Design

The XC-PWC14-DMX05 is built around a dual-conductor architecture matched precisely to each signal type. The power side uses 14AWG oxygen-free copper conductors, appropriate for the current demands of professional lighting fixtures without generating heat in a tightly bundled run. The DMX control side uses 20AWG OFC conductors, engineered for the low-capacitance, stable signal transfer that DMX512 protocol requires across a daisy chain. Using the correct gauge for each function is not just smart engineering, it is the standard that separates a professional cable from a compromise.

Shielding and Interference Rejection

Shielding on the XC-PWC14-DMX05 is dual-layer: a tinned copper braid at 85% coverage combined with a Duofoil® layer at 100% coverage. In real-world production environments crowded with wireless packs, dimmer racks, and digital switching power supplies, that combination matters. The braid handles low-frequency interference while the foil provides full-coverage rejection of higher-frequency noise. A polyethylene inner jacket further isolates the conductors from each other within the cable body.

Jacket and Physical Build

The outer jacket is black PVC, chosen for its durability, flexibility, and stage-appropriate low profile. The compact cable diameter also reduces eddy currents, which degrade performance in less carefully designed multi-conductor cables. The XC-PWC14-DMX05 is built to be coiled, uncoiled, run across hot stages, and packed in cable bags repeatedly without losing its integrity.

Connector Specifications

Each end of the  XC-PWC14-DMX05 terminates in two PowerKon locking power connectors and two 3-pin XLR DMX connectors. The PowerKon is a 3-conductor twist-lock connector that sequences the ground contact before neutral and line, which is the correct and safe connection order for live power. This makes it the professional standard across amplified speaker systems, lighting fixtures, and powered production equipment globally. The 3-pin XLR DMX connectors provide standard DMX512 compatibility across the full range of professional lighting fixtures.

Length and Application

At 5 feet, the  XC-PWC14-DMX05 bridges the gap between the short-jump 3-foot variant and longer production runs. It is the right choice for spacing between fixtures on a truss section, running from a power and DMX distro point to a fixture that sits a few feet off-center, or managing the first connection in a longer daisy chain where a 3-footer falls just short. The 5-foot length keeps things tidy without leaving excess cable to manage on the rig.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC14-DMX05 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Combo jumper design combines dual PowerKon power connectors and dual 3-pin XLR DMX connectors on each end into a single 5-foot cable run, eliminating the need for separate power and DMX lines to each fixture
• 14AWG OFC power conductors sized correctly for professional lighting fixture current demands
• 20AWG OFC DMX conductors optimized for stable, low-capacitance DMX512 signal transmission
• Dual-layer shielding with 85% tinned copper braid plus Duofoil® at 100% coverage for noise rejection in dense production environments
• Polyethylene inner jacket provides additional conductor isolation within the cable body
• Black PVC outer jacket for durability, flexibility, and low visibility on stage
• Compact cable diameter reduces eddy currents that degrade signal quality in multi-conductor builds
• PowerKon locking connectors sequence ground contact before neutral and line for safe live power connections
• 3-pin XLR DMX connectors on each end for standard DMX512 compatibility
• 5-foot length ideal for fixture-to-fixture spacing on truss, distro-to-fixture runs, and daisy chain starting points where a 3-foot cable falls short
• Master box quantities available in packs of 10 and 50
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Dual PowerKon to Dual XLR

Compatibility

Dual PowerKon to Dual XLR

Product details

Featuring the ProX XC-PWC14-DMX05 5' Dual 14AWG PowerKon to Dual DMX Combo Link Jumper Cable, the production-ready solution for getting both power and DMX control to your lighting fixtures in a single, organized run. Every professional lighting rig has the same problem: two cables going to every fixture, power and DMX side by side, multiplied across every moving head, LED wash, and effect unit on the rig. The  XC-PWC14-DMX05 cuts that in half. With dual locking PowerKon connectors and dual 3-pin XLR DMX connectors on each end, it replaces two separate runs with one and does it at a 5-foot length that gives you the reach to work comfortably between fixtures, distro boxes, and control nodes without excess cable pooling on the ground.

Cable Construction and Conductor Design

The XC-PWC14-DMX05 is built around a dual-conductor architecture matched precisely to each signal type. The power side uses 14AWG oxygen-free copper conductors, appropriate for the current demands of professional lighting fixtures without generating heat in a tightly bundled run. The DMX control side uses 20AWG OFC conductors, engineered for the low-capacitance, stable signal transfer that DMX512 protocol requires across a daisy chain. Using the correct gauge for each function is not just smart engineering, it is the standard that separates a professional cable from a compromise.

Shielding and Interference Rejection

Shielding on the XC-PWC14-DMX05 is dual-layer: a tinned copper braid at 85% coverage combined with a Duofoil® layer at 100% coverage. In real-world production environments crowded with wireless packs, dimmer racks, and digital switching power supplies, that combination matters. The braid handles low-frequency interference while the foil provides full-coverage rejection of higher-frequency noise. A polyethylene inner jacket further isolates the conductors from each other within the cable body.

Jacket and Physical Build

The outer jacket is black PVC, chosen for its durability, flexibility, and stage-appropriate low profile. The compact cable diameter also reduces eddy currents, which degrade performance in less carefully designed multi-conductor cables. The XC-PWC14-DMX05 is built to be coiled, uncoiled, run across hot stages, and packed in cable bags repeatedly without losing its integrity.

Connector Specifications

Each end of the  XC-PWC14-DMX05 terminates in two PowerKon locking power connectors and two 3-pin XLR DMX connectors. The PowerKon is a 3-conductor twist-lock connector that sequences the ground contact before neutral and line, which is the correct and safe connection order for live power. This makes it the professional standard across amplified speaker systems, lighting fixtures, and powered production equipment globally. The 3-pin XLR DMX connectors provide standard DMX512 compatibility across the full range of professional lighting fixtures.

Length and Application

At 5 feet, the  XC-PWC14-DMX05 bridges the gap between the short-jump 3-foot variant and longer production runs. It is the right choice for spacing between fixtures on a truss section, running from a power and DMX distro point to a fixture that sits a few feet off-center, or managing the first connection in a longer daisy chain where a 3-footer falls just short. The 5-foot length keeps things tidy without leaving excess cable to manage on the rig.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC14-DMX05 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Combo jumper design combines dual PowerKon power connectors and dual 3-pin XLR DMX connectors on each end into a single 5-foot cable run, eliminating the need for separate power and DMX lines to each fixture
• 14AWG OFC power conductors sized correctly for professional lighting fixture current demands
• 20AWG OFC DMX conductors optimized for stable, low-capacitance DMX512 signal transmission
• Dual-layer shielding with 85% tinned copper braid plus Duofoil® at 100% coverage for noise rejection in dense production environments
• Polyethylene inner jacket provides additional conductor isolation within the cable body
• Black PVC outer jacket for durability, flexibility, and low visibility on stage
• Compact cable diameter reduces eddy currents that degrade signal quality in multi-conductor builds
• PowerKon locking connectors sequence ground contact before neutral and line for safe live power connections
• 3-pin XLR DMX connectors on each end for standard DMX512 compatibility
• 5-foot length ideal for fixture-to-fixture spacing on truss, distro-to-fixture runs, and daisy chain starting points where a 3-foot cable falls short
• Master box quantities available in packs of 10 and 50
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.