10PCS 2 Ft. High Performance 12AWG Blue to Gray Link Cable for Power Connection compatible devices

Overview

Introducing the ProX XC-PWC12-02, a 2 ft. 12 AWG blue to gray link cable built for the working professional who needs to daisy chain powered speakers, amplifiers, and stage gear without dragging a separate power cord to every box. Short jumpers take the most abuse in a rig because they live in the tightest spots, get stepped on, and get yanked during load out. This one is built with heavy 12 AWG pure copper conductors and locking connectors on both ends, so the power stays where you put it from the first set through the last teardown. If you run a line array, a stack of powered tops on poles, or a rack of amps that need to be linked cleanly, the XC-PWC12-02 gets it done in a package that costs a fraction of what a failed connection costs you mid show.

Blue to Gray Link Configuration

The XC-PWC12-02 uses a gray male connector on one end and a blue male connector on the other, the standard link arrangement for chaining Power Connection compatible gear. The gray end plugs into the power output of the first device and the blue end feeds the power input of the next one. That gives you a clean, purpose built jumper instead of a homemade adapter chain, and it keeps your power runs organized and easy to trace when you are troubleshooting under stage lights.

Twist Lock Latching Connectors

Both ends use a fast twist lock latching system that seats with a quarter turn and stays put. Unlike the IEC 60320 C13 and C14 connectors found on consumer audio components, computers, and power adapters, this connector will not shake loose from stage vibration, foot traffic, or a tug on the cable. The three conductor design mates the ground contact before the neutral and line contacts, so every connection is electrically safe from the moment it engages.

12 AWG Pure Copper Conductors Inside the jacket you get 12 AWG pure copper, a heavier gauge than the 14 AWG cable most players reach for. More copper means less voltage drop across the run and cooler operation under sustained load, which matters when you are pushing high output powered cabinets or feeding several devices down a chain. Pure copper also holds up better to repeated coiling and flexing than the copper clad alternatives you find in bargain cable.

IP65 Dust and Water Protection

The connectors carry an IP65 dust and water protection rating, so outdoor festivals, tent stages, and dusty warehouse gigs are not a problem. Rain does not always wait for the encore, and this cable was specified with that reality in mind.

UL and cUL Tested Components

The XC-PWC12-02 is built with UL and cUL tested components. That is the kind of detail a venue electrician, a production manager, or an insurance inspector will ask about, and it is the kind of detail that separates professional gear from the no name cable in the bottom of the gig bag.

2 Ft. Length Built for Tight Spacing At 2 ft., this cable is sized for speaker to speaker links on a pole or ground stack, rack to rack jumps inside a road case, and any short hop where a 10 ft. cord would just become a coil of slack on the floor. Less excess cable means a cleaner stage, fewer trip hazards, and a faster strike.

Backed by ProX

ProX cables are built with uncompromised quality and consistent performance at every connection, across instrument cables, speaker cables, RCA cables, DMX cables, power cables, and more. Our cables are made for professionals, by professionals.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC12-02 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Gray Male to Blue Male Link Configuration Purpose built jumper for chaining Power Connection compatible powered speakers, amps, and stage devices
• Twist Lock Latching System Quarter turn locking connectors that will not shake loose from vibration or foot traffic
• Ground Mates First Three conductor design connects ground before neutral and line for a safe engagement every time
• 12 AWG Pure Copper Conductors Heavy gauge copper for lower voltage drop and cooler operation under sustained load
• IP65 Dust and Water Protection Rating Ready for outdoor stages, tent gigs, and dusty venues
• UL and cUL Tested Components Built to standards your venue electrician and production manager expect
• Safer Than IEC C13 and C14 Connections Locking power connection instead of the friction fit found on consumer gear
• 2 Ft. Length Sized for speaker to speaker links, rack jumps, and tight stack spacing with no excess slack
• Extremely Robust and Reliable Built for repeated coiling, load in, and load out
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Power Connection Compatible

Compatibility

Power Connection Compatible

Product details

Introducing the ProX XC-PWC12-02, a 2 ft. 12 AWG blue to gray link cable built for the working professional who needs to daisy chain powered speakers, amplifiers, and stage gear without dragging a separate power cord to every box. Short jumpers take the most abuse in a rig because they live in the tightest spots, get stepped on, and get yanked during load out. This one is built with heavy 12 AWG pure copper conductors and locking connectors on both ends, so the power stays where you put it from the first set through the last teardown. If you run a line array, a stack of powered tops on poles, or a rack of amps that need to be linked cleanly, the XC-PWC12-02 gets it done in a package that costs a fraction of what a failed connection costs you mid show.

Blue to Gray Link Configuration

The XC-PWC12-02 uses a gray male connector on one end and a blue male connector on the other, the standard link arrangement for chaining Power Connection compatible gear. The gray end plugs into the power output of the first device and the blue end feeds the power input of the next one. That gives you a clean, purpose built jumper instead of a homemade adapter chain, and it keeps your power runs organized and easy to trace when you are troubleshooting under stage lights.

Twist Lock Latching Connectors

Both ends use a fast twist lock latching system that seats with a quarter turn and stays put. Unlike the IEC 60320 C13 and C14 connectors found on consumer audio components, computers, and power adapters, this connector will not shake loose from stage vibration, foot traffic, or a tug on the cable. The three conductor design mates the ground contact before the neutral and line contacts, so every connection is electrically safe from the moment it engages.

12 AWG Pure Copper Conductors Inside the jacket you get 12 AWG pure copper, a heavier gauge than the 14 AWG cable most players reach for. More copper means less voltage drop across the run and cooler operation under sustained load, which matters when you are pushing high output powered cabinets or feeding several devices down a chain. Pure copper also holds up better to repeated coiling and flexing than the copper clad alternatives you find in bargain cable.

IP65 Dust and Water Protection

The connectors carry an IP65 dust and water protection rating, so outdoor festivals, tent stages, and dusty warehouse gigs are not a problem. Rain does not always wait for the encore, and this cable was specified with that reality in mind.

UL and cUL Tested Components

The XC-PWC12-02 is built with UL and cUL tested components. That is the kind of detail a venue electrician, a production manager, or an insurance inspector will ask about, and it is the kind of detail that separates professional gear from the no name cable in the bottom of the gig bag.

2 Ft. Length Built for Tight Spacing At 2 ft., this cable is sized for speaker to speaker links on a pole or ground stack, rack to rack jumps inside a road case, and any short hop where a 10 ft. cord would just become a coil of slack on the floor. Less excess cable means a cleaner stage, fewer trip hazards, and a faster strike.

Backed by ProX

ProX cables are built with uncompromised quality and consistent performance at every connection, across instrument cables, speaker cables, RCA cables, DMX cables, power cables, and more. Our cables are made for professionals, by professionals.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-PWC12-02 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Gray Male to Blue Male Link Configuration Purpose built jumper for chaining Power Connection compatible powered speakers, amps, and stage devices
• Twist Lock Latching System Quarter turn locking connectors that will not shake loose from vibration or foot traffic
• Ground Mates First Three conductor design connects ground before neutral and line for a safe engagement every time
• 12 AWG Pure Copper Conductors Heavy gauge copper for lower voltage drop and cooler operation under sustained load
• IP65 Dust and Water Protection Rating Ready for outdoor stages, tent gigs, and dusty venues
• UL and cUL Tested Components Built to standards your venue electrician and production manager expect
• Safer Than IEC C13 and C14 Connections Locking power connection instead of the friction fit found on consumer gear
• 2 Ft. Length Sized for speaker to speaker links, rack jumps, and tight stack spacing with no excess slack
• Extremely Robust and Reliable Built for repeated coiling, load in, and load out
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.