3 Ft Dual 1/4" TS Male to Dual XLR Male Unbalanced Audio Cable

Overview

Introducing the ProX XC-DPXM03 3 Ft. Dual 1/4" TS Male to Dual XLR Male Unbalanced Audio Cable. If your keyboard, drum machine, or audio interface sends left and right out of two 1/4" TS jacks, but the mixer, powered speaker, or stage box you are plugging into only takes XLR, this is the cable that closes that gap. Two 1/4" TS male plugs on one end, two XLR male plugs on the other, built as one dual cable so your left and right stay together instead of turning into two loose cables on the floor. At 3 ft., the ProX XC-DPXM03 is sized for short, clean connections in a rack, on a keyboard stand, or in a DJ booth where extra cable only gets in the way.

Connector Configuration

Each 1/4" TS male plug is wired to its own XLR male plug, giving you two separate channels in one cable. This is not a splitter. Channel one stays channel one and channel two stays channel two from end to end, which is exactly what you need when a stereo source is going into two channels on a mixer.

Color Coded Channels

One plug at each end carries a red band so you can tell the channels apart. In a dark booth or behind a crowded rack, that means you can patch left and right correctly the first time without tracing the cable back by hand.

Dual Cable Design

Both channels run side by side inside a PVC outer jacket, so the pair coils, packs, and routes like a single cable. That means less clutter on stage and no more grabbing two cables that turn out to be different lengths.

Shielded Channels

Each channel has its own copper shield to help keep hum and interference out of your signal. With two channels running this close together, separate shielding matters for keeping your left and right clean.

Unbalanced Signal

TS connections are unbalanced, and this cable carries that unbalanced signal straight into your XLR inputs. It does not convert the signal to balanced. Unbalanced signals do best on short runs, which is why a 3 ft. length is a good match. For long runs or rooms with a lot of electrical noise, a DI box is the better tool for the job.

Connectors and Contacts

Gold plated contacts on both the 1/4" and XLR plugs give you a clean, corrosion resistant connection every time you plug in. All metal connector housings are built to handle regular setup and teardown without cracking or loosening.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when gear fails during a show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-DPXM03 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

• Connector Configuration: Dual 1/4" TS male to dual XLR male
• Two Independent Channels: Each 1/4" plug wired to its own XLR plug, not a splitter
• Cable Length: 3 ft. for short rack, stand, and booth connections
• Color Coded Channels: Red band on one plug at each end for quick channel ID
• Dual Cable Design: Both channels run side by side in one PVC jacket for easy coiling and routing
• Shielded Channels: Each channel has its own copper shield to help reduce hum and interference
• Gold Plated Contacts: Clean, corrosion resistant connection on every plug
• All Metal Connectors: Built to handle regular setup and teardown
• Signal Type: Unbalanced audio, two channel
• Use Case: Stereo keyboards, drum machines, and audio interface line outputs into XLR inputs on mixers, powered speakers, and stage boxes
• Packaging: Master box qty 10 pcs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Dual TS-M to Dual XLR-Male

Compatibility

Dual TS-M to Dual XLR-Male

Product details

Introducing the ProX XC-DPXM03 3 Ft. Dual 1/4" TS Male to Dual XLR Male Unbalanced Audio Cable. If your keyboard, drum machine, or audio interface sends left and right out of two 1/4" TS jacks, but the mixer, powered speaker, or stage box you are plugging into only takes XLR, this is the cable that closes that gap. Two 1/4" TS male plugs on one end, two XLR male plugs on the other, built as one dual cable so your left and right stay together instead of turning into two loose cables on the floor. At 3 ft., the ProX XC-DPXM03 is sized for short, clean connections in a rack, on a keyboard stand, or in a DJ booth where extra cable only gets in the way.

Connector Configuration

Each 1/4" TS male plug is wired to its own XLR male plug, giving you two separate channels in one cable. This is not a splitter. Channel one stays channel one and channel two stays channel two from end to end, which is exactly what you need when a stereo source is going into two channels on a mixer.

Color Coded Channels

One plug at each end carries a red band so you can tell the channels apart. In a dark booth or behind a crowded rack, that means you can patch left and right correctly the first time without tracing the cable back by hand.

Dual Cable Design

Both channels run side by side inside a PVC outer jacket, so the pair coils, packs, and routes like a single cable. That means less clutter on stage and no more grabbing two cables that turn out to be different lengths.

Shielded Channels

Each channel has its own copper shield to help keep hum and interference out of your signal. With two channels running this close together, separate shielding matters for keeping your left and right clean.

Unbalanced Signal

TS connections are unbalanced, and this cable carries that unbalanced signal straight into your XLR inputs. It does not convert the signal to balanced. Unbalanced signals do best on short runs, which is why a 3 ft. length is a good match. For long runs or rooms with a lot of electrical noise, a DI box is the better tool for the job.

Connectors and Contacts

Gold plated contacts on both the 1/4" and XLR plugs give you a clean, corrosion resistant connection every time you plug in. All metal connector housings are built to handle regular setup and teardown without cracking or loosening.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when gear fails during a show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-DPXM03 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Connector Configuration: Dual 1/4" TS male to dual XLR male
• Two Independent Channels: Each 1/4" plug wired to its own XLR plug, not a splitter
• Cable Length: 3 ft. for short rack, stand, and booth connections
• Color Coded Channels: Red band on one plug at each end for quick channel ID
• Dual Cable Design: Both channels run side by side in one PVC jacket for easy coiling and routing
• Shielded Channels: Each channel has its own copper shield to help reduce hum and interference
• Gold Plated Contacts: Clean, corrosion resistant connection on every plug
• All Metal Connectors: Built to handle regular setup and teardown
• Signal Type: Unbalanced audio, two channel
• Use Case: Stereo keyboards, drum machines, and audio interface line outputs into XLR inputs on mixers, powered speakers, and stage boxes
• Packaging: Master box qty 10 pcs
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.