5PCS 100 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Coupler Patch Cable

Overview

Featuring the ProX XC-DMX100 100 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Cable, the most demanding single-cable DMX run in the ProX line and the one built for the production environments where distance is not a consideration — it is a requirement. One hundred feet is the cable that crosses a full outdoor festival stage from one side to the other, runs a universe from a backstage controller rack to a front truss position, or threads through a permanent install where every foot of the run earns its place. At this length, every element of the cable construction has to perform. The ProX XC-DMX100 is built around the same electrical precision as the rest of the ProX 3-pin DMX family, scaled to handle 100 feet without compromise.

Construction and Signal Path

The ProX XC-DMX100 uses a twisted quad data cable design with polyethylene insulation on each conductor. Maintaining a nominal characteristic impedance of 110 ohms across a full 100-foot length is where the engineering of this cable is most visible. The EIA-485 / DMX512 standard specifies 110 ohms, and any drift across a run this long invites reflections that can corrupt or drop data at every fixture downstream. The twisted quad geometry holds that number steady. Duofoil shielding provides 100% coverage along the entire length, and a tinned copper braid adds 85% coverage on top. On a 100-foot run threading through a production environment loaded with dimmers, power distribution, wireless systems, and LED drivers, both shields are actively working the entire length of the cable.

Conductors, Transfer Quality, and Attenuation

Conductors are 22 AWG tinned copper with gold and silver-plated contacts at both connectors. Nominal capacitance from conductor to conductor at 1 kHz is 12.8 pF/ft, with conductor-to-shield capacitance at 23 pF/ft. Nominal propagation velocity is 66%, with a nominal delay of 1.6 nanoseconds per foot. Nominal conductor DC resistance is 24 ohms per 1000 ft at 20 degrees C, and outer shield resistance is 3.4 ohms per 1000 ft under the same conditions. At 100 feet, nominal attenuation reaches its published rating of 0.6 dB per 100 ft at 1 MHz, which is the spec that matters most on a run this length. The cable is designed to stay within it. Maximum recommended current is 2.1 amps per conductor at 25 degrees C.

Jacket and Durability

The flexible PVC outer jacket covers all 100 feet and is rated for an operating temperature range of -30 degrees C to +75 degrees C. A 100-foot cable is a serious piece of kit on any touring rig or permanent install. It gets coiled into a large loop, loaded, transported, and deployed repeatedly. The PVC jacket is built to hold up through that cycle without cracking, stiffening, or developing the stress-induced failures that compromise long-run cable performance over time.

Connectors

Both ends use 3-pin XLR-style DMX connectors with all-metal chassis construction and gold and silver-plated contacts. On a 100-foot run, the connector at each end carries the full responsibility for the data chain that runs between them. A failed connector at either end means 100 feet of cable out of the rig until it is swapped. These are built not to be the weak link.

Testing and Quality Control

Every ProX XC-DMX100 is individually tested before it ships. At 100 feet, there is no reasonable way to field-test a cable before it goes into a show. ProX handles that verification before it ever leaves the facility so you can deploy it with confidence.

Built for the Longest Runs in Live Production

Systems engineers, production managers, head electricians, and AV rental companies working large-format concerts, festivals, permanent venue installs, and multi-universe touring rigs will find the ProX XC-DMX100 is the right cable for the distances that define large-scale production. One hundred feet of individually tested, dual-shielded, precision-spec DMX cable built to deliver clean data from one end of the production to the other.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-DMX100 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 100 Ft. DMX Male 3-Pin to Female 3-Pin cable, the maximum-distance option in the ProX 3-pin DMX line, built for festival stages, touring rigs, and large-format permanent installs
• 110-Ohm nominal characteristic impedance precisely matched to EIA-485 / DMX512 protocol requirements across the full 100-foot length
• Twisted quad data cable construction for stable, accurate DMX data transmission over maximum distance
• Dual-layer shielding: Duofoil (100% coverage) plus tinned copper braid (85% coverage) for maximum RF and EMI interference rejection across the entire run
• Nominal attenuation: 0.6 dB per 100 ft at 1 MHz, the published spec the cable is designed to meet at full length
• 22 AWG tinned copper conductors for consistent, dependable conductivity
• Gold and silver-plated contacts for superior connection quality and corrosion resistance at both ends
• All-metal connector chassis at both ends for durability under high-volume production and rental use
• Flexible PVC outer jacket stays pliable across a wide temperature range
• Operating temperature range: -30 degrees C to +75 degrees C
• Nominal capacitance: 12.8 pF/ft conductor to conductor at 1 kHz; 23 pF/ft conductor to shield at 1 kHz
• Nominal propagation velocity: 66% / Nominal delay: 1.6 ns/ft
• Nominal conductor DC resistance: 24 ohms per 1000 ft at 20 degrees C
• Nominal outer shield DC resistance: 3.4 ohms per 1000 ft at 20 degrees C
• Maximum recommended current: 2.1 amps per conductor at 25 degrees C
• 100% individually tested before shipment
•  ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

DMX XLR3-M to XLR3-F

Compatibility

DMX XLR3-M to XLR3-F

Product details

Featuring the ProX XC-DMX100 100 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Cable, the most demanding single-cable DMX run in the ProX line and the one built for the production environments where distance is not a consideration — it is a requirement. One hundred feet is the cable that crosses a full outdoor festival stage from one side to the other, runs a universe from a backstage controller rack to a front truss position, or threads through a permanent install where every foot of the run earns its place. At this length, every element of the cable construction has to perform. The ProX XC-DMX100 is built around the same electrical precision as the rest of the ProX 3-pin DMX family, scaled to handle 100 feet without compromise.

Construction and Signal Path

The ProX XC-DMX100 uses a twisted quad data cable design with polyethylene insulation on each conductor. Maintaining a nominal characteristic impedance of 110 ohms across a full 100-foot length is where the engineering of this cable is most visible. The EIA-485 / DMX512 standard specifies 110 ohms, and any drift across a run this long invites reflections that can corrupt or drop data at every fixture downstream. The twisted quad geometry holds that number steady. Duofoil shielding provides 100% coverage along the entire length, and a tinned copper braid adds 85% coverage on top. On a 100-foot run threading through a production environment loaded with dimmers, power distribution, wireless systems, and LED drivers, both shields are actively working the entire length of the cable.

Conductors, Transfer Quality, and Attenuation

Conductors are 22 AWG tinned copper with gold and silver-plated contacts at both connectors. Nominal capacitance from conductor to conductor at 1 kHz is 12.8 pF/ft, with conductor-to-shield capacitance at 23 pF/ft. Nominal propagation velocity is 66%, with a nominal delay of 1.6 nanoseconds per foot. Nominal conductor DC resistance is 24 ohms per 1000 ft at 20 degrees C, and outer shield resistance is 3.4 ohms per 1000 ft under the same conditions. At 100 feet, nominal attenuation reaches its published rating of 0.6 dB per 100 ft at 1 MHz, which is the spec that matters most on a run this length. The cable is designed to stay within it. Maximum recommended current is 2.1 amps per conductor at 25 degrees C.

Jacket and Durability

The flexible PVC outer jacket covers all 100 feet and is rated for an operating temperature range of -30 degrees C to +75 degrees C. A 100-foot cable is a serious piece of kit on any touring rig or permanent install. It gets coiled into a large loop, loaded, transported, and deployed repeatedly. The PVC jacket is built to hold up through that cycle without cracking, stiffening, or developing the stress-induced failures that compromise long-run cable performance over time.

Connectors

Both ends use 3-pin XLR-style DMX connectors with all-metal chassis construction and gold and silver-plated contacts. On a 100-foot run, the connector at each end carries the full responsibility for the data chain that runs between them. A failed connector at either end means 100 feet of cable out of the rig until it is swapped. These are built not to be the weak link.

Testing and Quality Control

Every ProX XC-DMX100 is individually tested before it ships. At 100 feet, there is no reasonable way to field-test a cable before it goes into a show. ProX handles that verification before it ever leaves the facility so you can deploy it with confidence.

Built for the Longest Runs in Live Production

Systems engineers, production managers, head electricians, and AV rental companies working large-format concerts, festivals, permanent venue installs, and multi-universe touring rigs will find the ProX XC-DMX100 is the right cable for the distances that define large-scale production. One hundred feet of individually tested, dual-shielded, precision-spec DMX cable built to deliver clean data from one end of the production to the other.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-DMX100 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 100 Ft. DMX Male 3-Pin to Female 3-Pin cable, the maximum-distance option in the ProX 3-pin DMX line, built for festival stages, touring rigs, and large-format permanent installs
• 110-Ohm nominal characteristic impedance precisely matched to EIA-485 / DMX512 protocol requirements across the full 100-foot length
• Twisted quad data cable construction for stable, accurate DMX data transmission over maximum distance
• Dual-layer shielding: Duofoil (100% coverage) plus tinned copper braid (85% coverage) for maximum RF and EMI interference rejection across the entire run
• Nominal attenuation: 0.6 dB per 100 ft at 1 MHz, the published spec the cable is designed to meet at full length
• 22 AWG tinned copper conductors for consistent, dependable conductivity
• Gold and silver-plated contacts for superior connection quality and corrosion resistance at both ends
• All-metal connector chassis at both ends for durability under high-volume production and rental use
• Flexible PVC outer jacket stays pliable across a wide temperature range
• Operating temperature range: -30 degrees C to +75 degrees C
• Nominal capacitance: 12.8 pF/ft conductor to conductor at 1 kHz; 23 pF/ft conductor to shield at 1 kHz
• Nominal propagation velocity: 66% / Nominal delay: 1.6 ns/ft
• Nominal conductor DC resistance: 24 ohms per 1000 ft at 20 degrees C
• Nominal outer shield DC resistance: 3.4 ohms per 1000 ft at 20 degrees C
• Maximum recommended current: 2.1 amps per conductor at 25 degrees C
• 100% individually tested before shipment
•  ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.