10PCS 10 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Cable

Overview

Featuring the ProX XC-DMX10 10 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Cable, a full-length DMX run built for stages, installs, and touring rigs that need to cover real distance without cutting corners on signal quality. Ten feet is where patch cables stop and working runs begin. This is the cable that reaches from a lighting console across a stage wing to the first fixture, that bridges two truss sections in a permanent install, or that gives you enough slack on a live event without leaving a pile of excess on the deck. The ProX XC-DMX10 handles all of it, backed by the same verified electrical specs used across the full ProX DMX cable line.

Construction and Signal Path

The ProX XC-DMX10 is built on a twisted quad data cable design with polyethylene insulation on each conductor. This architecture maintains a nominal characteristic impedance of 110 ohms throughout the full 10-foot length, exactly where EIA-485 and DMX512 protocol require it. A Duofoil shield layer provides 100% coverage, and a tinned copper braid adds 85% coverage on top of that. At 10 feet, the dual-layer shield becomes especially important: longer runs have more exposure to RF interference from dimmers, wireless systems, and power distribution running in parallel. Both shield layers work together to keep the data path clean from end to end.

Conductors and Transfer Quality

Conductors are 22 AWG tinned copper with gold and silver-plated contacts at both connectors. Nominal capacitance from conductor to conductor at 1 kHz is 12.8 pF/ft, with conductor-to-shield capacitance at 23 pF/ft. Nominal propagation velocity is 66%, with a nominal delay of 1.6 nanoseconds per foot. Nominal conductor DC resistance is 24 ohms per 1000 ft at 20 degrees C, and outer shield resistance measures 3.4 ohms per 1000 ft under the same conditions. At 10 feet, cumulative resistance and capacitance begin to matter more than they do on a short patch run, and these specs are built to stay within tolerance for DMX512 across full universe-length chains.

Jacket and Durability

The flexible PVC outer jacket is rated for an operating temperature range of -30 degrees C to +75 degrees C, covering everything from cold outdoor festivals to hot enclosed venues. Maximum recommended current is 2.1 amps per conductor at 25 degrees C. The jacket handles coiling, uncoiling, and constant repositioning during setup and teardown without stiffening or developing kinks that compromise the internal geometry.

Connectors

Both ends use 3-pin XLR-style DMX connectors with all-metal chassis construction. Gold and silver-plated contacts resist corrosion and maintain a reliable connection through repeated use. On a 10-foot cable that gets moved and re-patched show after show, connector build quality is not a secondary consideration. These hold up.

Testing and Quality Control

Every ProX XC-DMX10 is individually tested before it ships. Not batch-sampled, not pulled for spot checks. Each unit is verified against spec so the cable you pull out of the bag on show day performs exactly the way it should.

Built for the Distance

Lighting technicians, production designers, touring engineers, and AV rental companies who need a DMX cable that actually covers ground without compromising data integrity will find the ProX XC-DMX10 the right call. It is the length that handles the majority of real-world runs on a working stage, and it is built to the standard that professional production requires.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-DMX10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 10 Ft. DMX Male 3-Pin to Female 3-Pin cable, purpose-built for full-length stage and production runs
• 110-Ohm nominal characteristic impedance precisely matched to EIA-485 / DMX512 protocol requirements
• Twisted quad data cable construction for stable, accurate DMX data transmission across the full run
• Dual-layer shielding: Duofoil (100% coverage) plus tinned copper braid (85% coverage) for maximum RF interference rejection
• 22 AWG tinned copper conductors for consistent, dependable conductivity
• Gold and silver-plated contacts for superior connection quality and corrosion resistance
• All-metal connector chassis at both ends for durability under repeated use
• Flexible PVC outer jacket stays pliable across a wide temperature range
• Operating temperature range: -30 degrees C to +75 degrees C
• Nominal capacitance: 12.8 pF/ft conductor to conductor at 1 kHz; 23 pF/ft conductor to shield at 1 kHz
• Nominal propagation velocity: 66% / Nominal delay: 1.6 ns/ft
• Nominal conductor DC resistance: 24 ohms per 1000 ft at 20 degrees C
• Nominal outer shield DC resistance: 3.4 ohms per 1000 ft at 20 degrees C
• Maximum recommended current: 2.1 amps per conductor at 25 degrees C
• 100% individually tested before shipment
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

DMX-M to DMX-F (3-PIN)

Compatibility

DMX-M to DMX-F (3-PIN)

Product details

Featuring the ProX XC-DMX10 10 Ft. High Performance DMX Male 3-Pin to DMX Female 3-Pin Cable, a full-length DMX run built for stages, installs, and touring rigs that need to cover real distance without cutting corners on signal quality. Ten feet is where patch cables stop and working runs begin. This is the cable that reaches from a lighting console across a stage wing to the first fixture, that bridges two truss sections in a permanent install, or that gives you enough slack on a live event without leaving a pile of excess on the deck. The ProX XC-DMX10 handles all of it, backed by the same verified electrical specs used across the full ProX DMX cable line.

Construction and Signal Path

The ProX XC-DMX10 is built on a twisted quad data cable design with polyethylene insulation on each conductor. This architecture maintains a nominal characteristic impedance of 110 ohms throughout the full 10-foot length, exactly where EIA-485 and DMX512 protocol require it. A Duofoil shield layer provides 100% coverage, and a tinned copper braid adds 85% coverage on top of that. At 10 feet, the dual-layer shield becomes especially important: longer runs have more exposure to RF interference from dimmers, wireless systems, and power distribution running in parallel. Both shield layers work together to keep the data path clean from end to end.

Conductors and Transfer Quality

Conductors are 22 AWG tinned copper with gold and silver-plated contacts at both connectors. Nominal capacitance from conductor to conductor at 1 kHz is 12.8 pF/ft, with conductor-to-shield capacitance at 23 pF/ft. Nominal propagation velocity is 66%, with a nominal delay of 1.6 nanoseconds per foot. Nominal conductor DC resistance is 24 ohms per 1000 ft at 20 degrees C, and outer shield resistance measures 3.4 ohms per 1000 ft under the same conditions. At 10 feet, cumulative resistance and capacitance begin to matter more than they do on a short patch run, and these specs are built to stay within tolerance for DMX512 across full universe-length chains.

Jacket and Durability

The flexible PVC outer jacket is rated for an operating temperature range of -30 degrees C to +75 degrees C, covering everything from cold outdoor festivals to hot enclosed venues. Maximum recommended current is 2.1 amps per conductor at 25 degrees C. The jacket handles coiling, uncoiling, and constant repositioning during setup and teardown without stiffening or developing kinks that compromise the internal geometry.

Connectors

Both ends use 3-pin XLR-style DMX connectors with all-metal chassis construction. Gold and silver-plated contacts resist corrosion and maintain a reliable connection through repeated use. On a 10-foot cable that gets moved and re-patched show after show, connector build quality is not a secondary consideration. These hold up.

Testing and Quality Control

Every ProX XC-DMX10 is individually tested before it ships. Not batch-sampled, not pulled for spot checks. Each unit is verified against spec so the cable you pull out of the bag on show day performs exactly the way it should.

Built for the Distance

Lighting technicians, production designers, touring engineers, and AV rental companies who need a DMX cable that actually covers ground without compromising data integrity will find the ProX XC-DMX10 the right call. It is the length that handles the majority of real-world runs on a working stage, and it is built to the standard that professional production requires.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XC-DMX10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• 10 Ft. DMX Male 3-Pin to Female 3-Pin cable, purpose-built for full-length stage and production runs
• 110-Ohm nominal characteristic impedance precisely matched to EIA-485 / DMX512 protocol requirements
• Twisted quad data cable construction for stable, accurate DMX data transmission across the full run
• Dual-layer shielding: Duofoil (100% coverage) plus tinned copper braid (85% coverage) for maximum RF interference rejection
• 22 AWG tinned copper conductors for consistent, dependable conductivity
• Gold and silver-plated contacts for superior connection quality and corrosion resistance
• All-metal connector chassis at both ends for durability under repeated use
• Flexible PVC outer jacket stays pliable across a wide temperature range
• Operating temperature range: -30 degrees C to +75 degrees C
• Nominal capacitance: 12.8 pF/ft conductor to conductor at 1 kHz; 23 pF/ft conductor to shield at 1 kHz
• Nominal propagation velocity: 66% / Nominal delay: 1.6 ns/ft
• Nominal conductor DC resistance: 24 ohms per 1000 ft at 20 degrees C
• Nominal outer shield DC resistance: 3.4 ohms per 1000 ft at 20 degrees C
• Maximum recommended current: 2.1 amps per conductor at 25 degrees C
• 100% individually tested before shipment
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.