Allen & Heath Qu-5 Audio Console, Padded Transport Bag with Shoulder Strap by ALP

Overview

ProX proudly introduces the ProX XAP-AHQU5 ALP Padded Transport Bag for Allen & Heath Qu-5 Digital Mixer, a custom fit carry bag built to get your Qu-5 to the gig and back without a scratch. The Qu-5 packs a touchscreen, motorized faders, and a lot of sensitive electronics into one compact desk, and all of it is exposed every time you load in, load out, or stack gear in a van. This bag gives it a padded, reinforced shell that takes the hits so your console doesn't. It comes from ALP, a manufacturer world recognized for the highest quality and longevity in professional transport gear, and it's built for engineers, rental houses, churches, and touring bands who move their mixer often and can't afford downtime.

Made to Fit the Allen & Heath Qu-5

This isn't a generic mixer bag that you pad out with towels. The ProX AHQU5 is shaped for one Allen & Heath Qu-5 console, so the mixer sits snug with no room to slide around during transport. A secure fit matters because most transit damage happens when gear shifts and knocks against its own container.

1500 Denier Cordura® Exterior The outer shell is made from 1500 Denier Cordura®, a heavy fabric known for resisting tears, scuffs, and abrasion. It holds up to rough loading docks, truck floors, and crowded backstage areas far better than lighter bag fabrics. That means the bag keeps looking and working like new after years of use, not just a few months.

Topstitched Construction with Reinforced Borders

Every seam is topstitched and finished with a 22mm (about 0.87") reinforced border. The edges and seams are where cheaper bags fail first, so ALP reinforces them to keep the shape and strength intact over long touring use.

Dual Layer Padded and Rigid Structure

Inside the walls, the ProX AHQU5 uses two layers of 11mm (about 0.43") foam plus a 3mm (about 0.12") Platex hardboard panel. The foam absorbs shock from bumps and drops, while the rigid Platex resists punctures and keeps pressure off the screen and controls. So if something heavy gets stacked on top or a corner catches a door frame, the console inside stays protected.

Heavy Duty 10mm Zipper

Access is through a heavy duty 10mm (about 0.39") zipper that runs smooth and holds up to constant opening and closing. You get fast setup and teardown without fighting a stuck or weak zipper at the end of a long night.

Two Exterior Pockets

Two outside pockets keep your essentials with the mixer, like cables, headphones, USB drives, and small accessories. Everything you need to run the show travels in one bag, which cuts down on the "who has the USB stick" moments at soundcheck.

Three Handles and a Removable Shoulder Strap

Three handles let you grab the bag from different angles and share the lift between two people when needed. For solo carries, a removable shoulder strap frees up your hands for a mic stand or cable case. Take the strap off when you don't need it so it stays out of the way during loading.

Eight Reinforced Base Pads

The bottom of the ProX AHQU5 sits on 8 reinforced pads. They keep the bag stable when set down, spread the weight evenly, and lift the fabric off wet or rough floors. That protects both the bag and the console from ground moisture and wear.

Silkscreen Logos

Professional silkscreen logos on the exterior make the bag easy to spot among a pile of road gear, so your crew can find the mixer fast.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant

This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Engineered by ALP. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX AHQU5 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Custom Fit for one Allen & Heath Qu-5 digital mixing console
• 1500 Denier Cordura® Exterior resists tears, scuffs, and abrasion
• Reinforced Construction with topstitching and 22mm (about 0.87") finishing borders
• Dual Layer Padding of 2x 11mm (about 0.43") foam for shock absorption
• 3mm (about 0.12") Platex Hardboard adds rigid puncture protection
• Heavy Duty 10mm Zipper for smooth, reliable access
• 2 Exterior Pockets for cables, headphones, and accessories
• 3 Handles for balanced one or two person lifting
• Removable Shoulder Strap for hands free carrying
• 8 Reinforced Base Pads for stability and floor protection
• Silkscreen Logos for fast identification on site
• Made by ALP in Portugal, distributed in North America by ProX Live Performance Gear
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Product details

ProX proudly introduces the ProX XAP-AHQU5 ALP Padded Transport Bag for Allen & Heath Qu-5 Digital Mixer, a custom fit carry bag built to get your Qu-5 to the gig and back without a scratch. The Qu-5 packs a touchscreen, motorized faders, and a lot of sensitive electronics into one compact desk, and all of it is exposed every time you load in, load out, or stack gear in a van. This bag gives it a padded, reinforced shell that takes the hits so your console doesn't. It comes from ALP, a manufacturer world recognized for the highest quality and longevity in professional transport gear, and it's built for engineers, rental houses, churches, and touring bands who move their mixer often and can't afford downtime.

Made to Fit the Allen & Heath Qu-5

This isn't a generic mixer bag that you pad out with towels. The ProX AHQU5 is shaped for one Allen & Heath Qu-5 console, so the mixer sits snug with no room to slide around during transport. A secure fit matters because most transit damage happens when gear shifts and knocks against its own container.

1500 Denier Cordura® Exterior The outer shell is made from 1500 Denier Cordura®, a heavy fabric known for resisting tears, scuffs, and abrasion. It holds up to rough loading docks, truck floors, and crowded backstage areas far better than lighter bag fabrics. That means the bag keeps looking and working like new after years of use, not just a few months.

Topstitched Construction with Reinforced Borders

Every seam is topstitched and finished with a 22mm (about 0.87") reinforced border. The edges and seams are where cheaper bags fail first, so ALP reinforces them to keep the shape and strength intact over long touring use.

Dual Layer Padded and Rigid Structure

Inside the walls, the ProX AHQU5 uses two layers of 11mm (about 0.43") foam plus a 3mm (about 0.12") Platex hardboard panel. The foam absorbs shock from bumps and drops, while the rigid Platex resists punctures and keeps pressure off the screen and controls. So if something heavy gets stacked on top or a corner catches a door frame, the console inside stays protected.

Heavy Duty 10mm Zipper

Access is through a heavy duty 10mm (about 0.39") zipper that runs smooth and holds up to constant opening and closing. You get fast setup and teardown without fighting a stuck or weak zipper at the end of a long night.

Two Exterior Pockets

Two outside pockets keep your essentials with the mixer, like cables, headphones, USB drives, and small accessories. Everything you need to run the show travels in one bag, which cuts down on the "who has the USB stick" moments at soundcheck.

Three Handles and a Removable Shoulder Strap

Three handles let you grab the bag from different angles and share the lift between two people when needed. For solo carries, a removable shoulder strap frees up your hands for a mic stand or cable case. Take the strap off when you don't need it so it stays out of the way during loading.

Eight Reinforced Base Pads

The bottom of the ProX AHQU5 sits on 8 reinforced pads. They keep the bag stable when set down, spread the weight evenly, and lift the fabric off wet or rough floors. That protects both the bag and the console from ground moisture and wear.

Silkscreen Logos

Professional silkscreen logos on the exterior make the bag easy to spot among a pile of road gear, so your crew can find the mixer fast.

World Recognized ALP Quality

ALP is known worldwide for building transport gear that lasts, and the ProX AHQU5 reflects that standard in its materials and stitching. It is a bag you buy once and keep using for years.

TAA Compliant

This ALP bag is compliant with the Trade Agreements Act (TAA), which means it is made in a TAA designated country and qualifies for purchase by US federal agencies, military branches, and government funded programs. For schools, universities, houses of worship, government venues, and contractors bidding on federal work, that makes approval simple. You can spec it straight into a purchase order without country of origin rules holding things up.

Engineered by ALP. Distributed in North America by ProX Live Performance Gear.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX AHQU5 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Custom Fit for one Allen & Heath Qu-5 digital mixing console
• 1500 Denier Cordura® Exterior resists tears, scuffs, and abrasion
• Reinforced Construction with topstitching and 22mm (about 0.87") finishing borders
• Dual Layer Padding of 2x 11mm (about 0.43") foam for shock absorption
• 3mm (about 0.12") Platex Hardboard adds rigid puncture protection
• Heavy Duty 10mm Zipper for smooth, reliable access
• 2 Exterior Pockets for cables, headphones, and accessories
• 3 Handles for balanced one or two person lifting
• Removable Shoulder Strap for hands free carrying
• 8 Reinforced Base Pads for stability and floor protection
• Silkscreen Logos for fast identification on site
• Made by ALP in Portugal, distributed in North America by ProX Live Performance Gear
• TAA Compliant Made in a TAA designated country and eligible for US government, military, and federally funded purchasing
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.