Tradeshow Booth 9.42 W X 9.42 L X 9.20 FT H with T Shape Design in center - K SERIES Light Duty

Overview

Introducing the ProX KTP-E1099T K SERIES Light Duty Tradeshow Booth with T Shape Center Design. You get a few seconds to stop someone walking the aisle, and a bare table under a pipe and drape backdrop rarely does it. This complete aluminum truss package gives your space a clean, professional frame that stands 9.20 ft tall. A T shape layout runs through the center and splits the booth into separate zones for product, branding, and conversation. It ships as a full kit with truss segments, junction blocks, couplers, and plates, so exhibitors, retail pop-up teams, and event planners can go from boxes to a finished structure without hunting down parts.

T Shape Center Design

Most entry booths are a simple box outline. The ProX KTP-E1099T runs a truss line through the middle of the space to form a T. That center run gives visitors a clear focal point and a natural way to divide your display. It looks like a custom build, but it goes together entirely from standard ProX truss parts.

6 Way Square Truss Junction Blocks Four 6 way junction blocks tie the frame together at its connection points. Three ship with 2 way coupler sets of 8 half conical couplers each, and one ships with a 4 way set of 16 half conical couplers. A 6 way block accepts truss from any direction, which is what makes the T layout possible with stock parts.

K-Truss™ F34 Economy Aluminum Segments

The frame is built from four 8.20 ft (2.5M) segments and two 3.28 ft (1M) segments of K-Truss™ F34 four chord square truss with an 11.42" profile. The 1.5mm aluminum construction keeps each piece light. The long segments weigh 22 lbs each and the short ones weigh 11 lbs, so handling and setup stay easy for a small booth crew. Every ProX truss section is welded by certified welders.

12" Aluminum Truss Plates Two pairs of 12" truss plates cut from 6mm aluminum come with the package, connectors included. They are made for F34, F32, and F31 conical square truss, so they fit this kit and carry over to other ProX conical systems you may add later.

Built for Display, Not for Rigging

Be clear on what this package is for. The K-Truss segments are designed for displays and non load bearing systems. That makes the ProX KTP-E1099T a strong fit for framing a booth, but it is not meant for hanging lights, speakers, or video. If your show needs to carry weight, look at the ProX F34 Conical 2mm or BoltX™ 3mm truss lines and confirm the load data for your setup.

Works With Other Truss Systems

ProX truss connects with many other manufacturers' systems. If you already own truss, the booth can often grow with parts you have on hand instead of starting over.

Built for Exhibitors, Retail, and Events

Trade show booths, exhibitor displays, kiosks, pop-up shops, retail spaces, DJ booth framing, presentations, and church gatherings all benefit from a structure that looks finished and sets up fast. The ProX KTP-E1099T gives smaller teams a professional presence without the cost of a fully custom build.

Shipping

The package ships in five box groups, and LTL freight is the suggested method.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX KTP-E1099T is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• Complete Trade Show Booth Truss Package Ships with truss segments, junction blocks, couplers, and plates in one kit
• T Shape Center Design A center truss run forms a T that divides the booth and creates a focal point
• 9.20 ft Overall Height Tall frame that stands out on a busy show floor
• Four 6 Way Square Truss Junction Blocks Accept truss from any direction for flexible layouts
• 40 Half Conical Couplers Included Three 2 way sets (8 each) and one 4 way set (16) supplied with the blocks
• K-Truss™ F34 Economy Aluminum Truss Four 8.20 ft (2.5M) and two 3.28 ft (1M) four chord square segments
• Lightweight 1.5mm Aluminum Construction Easy handling and quick setup for small crews
• Welded by Certified Welders Consistent, reliable build quality on every section
• Two Pairs of 12" Aluminum Truss Plates 6mm aluminum with connectors, made for F34, F32, and F31 conical square truss
• Display Use Design Built for booths and displays, not for suspending lighting, audio, or video loads
• Cross Brand Compatibility Connects with many other manufacturers' truss systems
• Versatile Applications Trade shows, exhibits, kiosks, pop-up shops, retail spaces, DJ booth framing, and presentations
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.

Package Contents

• XT-BP12AX2 (2)   Pair of 12" Aluminum 6mm Truss Top Plate for F34 F32 F31 Conical Square Truss with Connectors
• KT-F34SQ820 (4)   8.20 Ft. | 2.5M K-Truss F34 Economy Aluminum Truss for displays and non-load bearing systems
• XT-JB6W-2W (3)   6 Way Square Truss Junction Block - Includes 2 Way 8 Half Conical Couplers
• XT-JB6W-4W (1)   6 Way Square Truss Junction Block - Includes 4 Way 16 Half Conical Couplers
• KT-F34SQ328 (2)   3.28Ft. | 1M K-Truss F34 Economy Aluminum Truss for displays and non-load bearing systems

Product details

Introducing the ProX KTP-E1099T K SERIES Light Duty Tradeshow Booth with T Shape Center Design. You get a few seconds to stop someone walking the aisle, and a bare table under a pipe and drape backdrop rarely does it. This complete aluminum truss package gives your space a clean, professional frame that stands 9.20 ft tall. A T shape layout runs through the center and splits the booth into separate zones for product, branding, and conversation. It ships as a full kit with truss segments, junction blocks, couplers, and plates, so exhibitors, retail pop-up teams, and event planners can go from boxes to a finished structure without hunting down parts.

T Shape Center Design

Most entry booths are a simple box outline. The ProX KTP-E1099T runs a truss line through the middle of the space to form a T. That center run gives visitors a clear focal point and a natural way to divide your display. It looks like a custom build, but it goes together entirely from standard ProX truss parts.

6 Way Square Truss Junction Blocks Four 6 way junction blocks tie the frame together at its connection points. Three ship with 2 way coupler sets of 8 half conical couplers each, and one ships with a 4 way set of 16 half conical couplers. A 6 way block accepts truss from any direction, which is what makes the T layout possible with stock parts.

K-Truss™ F34 Economy Aluminum Segments

The frame is built from four 8.20 ft (2.5M) segments and two 3.28 ft (1M) segments of K-Truss™ F34 four chord square truss with an 11.42" profile. The 1.5mm aluminum construction keeps each piece light. The long segments weigh 22 lbs each and the short ones weigh 11 lbs, so handling and setup stay easy for a small booth crew. Every ProX truss section is welded by certified welders.

12" Aluminum Truss Plates Two pairs of 12" truss plates cut from 6mm aluminum come with the package, connectors included. They are made for F34, F32, and F31 conical square truss, so they fit this kit and carry over to other ProX conical systems you may add later.

Built for Display, Not for Rigging

Be clear on what this package is for. The K-Truss segments are designed for displays and non load bearing systems. That makes the ProX KTP-E1099T a strong fit for framing a booth, but it is not meant for hanging lights, speakers, or video. If your show needs to carry weight, look at the ProX F34 Conical 2mm or BoltX™ 3mm truss lines and confirm the load data for your setup.

Works With Other Truss Systems

ProX truss connects with many other manufacturers' systems. If you already own truss, the booth can often grow with parts you have on hand instead of starting over.

Built for Exhibitors, Retail, and Events

Trade show booths, exhibitor displays, kiosks, pop-up shops, retail spaces, DJ booth framing, presentations, and church gatherings all benefit from a structure that looks finished and sets up fast. The ProX KTP-E1099T gives smaller teams a professional presence without the cost of a fully custom build.

Shipping

The package ships in five box groups, and LTL freight is the suggested method.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX KTP-E1099T is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

Key features

• Complete Trade Show Booth Truss Package Ships with truss segments, junction blocks, couplers, and plates in one kit
• T Shape Center Design A center truss run forms a T that divides the booth and creates a focal point
• 9.20 ft Overall Height Tall frame that stands out on a busy show floor
• Four 6 Way Square Truss Junction Blocks Accept truss from any direction for flexible layouts
• 40 Half Conical Couplers Included Three 2 way sets (8 each) and one 4 way set (16) supplied with the blocks
• K-Truss™ F34 Economy Aluminum Truss Four 8.20 ft (2.5M) and two 3.28 ft (1M) four chord square segments
• Lightweight 1.5mm Aluminum Construction Easy handling and quick setup for small crews
• Welded by Certified Welders Consistent, reliable build quality on every section
• Two Pairs of 12" Aluminum Truss Plates 6mm aluminum with connectors, made for F34, F32, and F31 conical square truss
• Display Use Design Built for booths and displays, not for suspending lighting, audio, or video loads
• Cross Brand Compatibility Connects with many other manufacturers' truss systems
• Versatile Applications Trade shows, exhibits, kiosks, pop-up shops, retail spaces, DJ booth framing, and presentations
• ProX Limited Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.