The ProX XS-MH30WASHX2W was built differently. Most moving head cases in this category give you one way in - from the top. That works until you are dealing with oversized fixtures, a packed truck bay, a narrow backstage corridor, or a venue where getting above the case simply is not an option. The ProX XS-MH30WASHX2W was built with a smarter solution. This case features 3 doors - 2 front-access doors plus a top door - giving your crew direct, unobstructed access to both large moving head fixtures from the front of the case, without repositioning, without stacking issues, and without the delays that come with top-only lid designs. For large-format fixtures that are heavy, expensive, and difficult to maneuver, that front-access advantage is not a small detail. It is a real operational improvement every single time you work a show.

Previously before this design was considered, you would have to actually lift your rack systems  &  carefully place them down into the unit.  Now with the current front access design, this unnecessary risk is completely preventable.

Large moving head fixtures represent some of the most significant equipment investments in professional lighting production. They tour, they travel, they get loaded and unloaded at every venue on the schedule - and without the right case, that investment starts absorbing damage long before it reaches the end of its service life. The ProX XS-MH30WASHX2W is purpose-engineered for two large and oversized moving head units, built to the demands of touring production, rental inventory management, and professional event crews who need a case that performs as hard as the gear inside it.

Purpose-Built for Large and Oversized Moving Head Fixtures The ProX XS-MH30WASHX2W is specifically designed to accommodate large moving head units, including fixtures with large lighting bases that standard moving head cases simply cannot fit. This is not a scaled-up version of a smaller case - it is a purpose-designed solution for the format of large-format professional lighting fixtures, with interior dimensions and foam configurations matched to the real geometry of oversized moving heads.

3-Door Access Design - Front Access Changes Everything The ProX XS-MH30WASHX2W features 2 front-access doors on hinges plus a top door, giving your crew three points of access to both fixtures. The front-door configuration is the key differentiator here. When you are dealing with fixtures this size and this weight, being able to open the case from the front and access both units directly - without lifting a heavy lid, without clearing space above the case, and without working awkwardly from above - makes load-in and load-out faster, safer, and less physically demanding on your crew. No other case in this category delivers that combination of front-access convenience and oversized fixture capacity.

Stackable Caster Dishes with Aluminum Construction The ProX XS-MH30WASHX2W includes aluminum caster dishes in the case lid, allowing cases to be stacked securely during storage and transport. This is a critical feature for production companies and rental operations managing multiple units, where efficient stacking directly impacts how much gear fits in a truck and how stable the stack remains in transit.

Heavy-Duty Off-Terrain 4-Inch Caster Wheels Four heavy-duty 4-inch off-terrain steel casters give the ProX XS-MH30WASHX2W the mobility to roll across every surface a working production crew encounters. At 137 lbs loaded and housing two large fixtures, this case needs casters that can handle real terrain - and these deliver. The caster system is built for performance environments, not showroom floors.

ProX Honeycomb Digital™ Laminated Exterior The ProX XS-MH30WASHX2W features the signature ProX Honeycomb Digital™ surface - a sleek hexagonal grid laminate finish in silver hardware on black that provides scratch resistance and maintains a professional appearance even after extended touring and repeated handling. This is the same exterior treatment trusted across the ProX professional case lineup.

High-Density Foam Interior with Customizable Configuration Inside the ProX XS-MH30WASHX2W, high-density foam provides form-fitting support and impact protection for both fixtures during transport. The foam interior is designed to cradle large moving head units securely, preventing movement and protecting finished surfaces, heads, and yokes from contact damage in transit.

Industrial-Grade Hardware Throughout The ProX XS-MH30WASHX2W is fitted with twist-locking recessed butterfly latches, recessed spring-loaded rubber handles, reinforced dual anchor rivets at key stress points, and a silver hardware finish on a black exterior. Every hardware component is selected and positioned for durability across repeated open-and-close cycles on a demanding production schedule.

This high-quality case showcases our Signature Honeycomb Digital™ laminated surface-protected laminate, with sleek hexagon grids. This design not only adds a unique aesthetic but also helps prevent minor to mild scratches.

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid-show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real-world feedback directly shapes the products we bring to market. The ProX XS-MH30WASHX2W is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands-on expertise and a brand that has never stopped raising the standard for live performance gear.

• 3-Door Front Access Design
• Fits 2x Large Moving Heads
• Ideal for units with a large base
• Stackable Caster Dishes
• Silver Hardware + Black Finish
• Heavy-duty Off-Terrain Steel 4" Casters
• Super-Sleek Honeycomb Digital™ Surface
• Recessed Spring-Loaded Rubber Handles
• Twist-locking Recessed Butterfly Latches
• High-Density Foam Interior
• Aluminum Caster Dishes in Case Lid
• Reinforced Dual Anchor Rivets
• ProX Limited Lifetime Warranty

All registered trademarks and trade names are properties of their respective owners and are used only for the clarification of the compatibility of our products with the products of the different manufacturers.