Pro Audio and Lighting
EUR
USD

0

Electro Voice RCM28 RCM-28, IRIS-NET OMNEO MODULE

$1,331.00 $985.99

Features: The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview...

Qty:
Features:

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.

Features:

  • OMNEO Network Interface
  • Extend Tour Grade performance with powerful DSP functionality
  • Advanced FIR-Drive loudspeaker optimization
  • High precision load impedance supervision
  • Two GPI and two GPO ports
  • One-button system test for fast, complete check of connected cables and components
  • Pilot tone detection for cable supervision
  • Six recallable DSP/configuration presets
  • Compatibility with any Dante network
  • Specifications:
  • A/D Conversion: 24 Bit linear, sigma-delta, 128x oversampling
  • Analog Inputs: 2 audio inputs on internal slot connector, pre-/post fader selectable
  • CAN Bus Interface: None
  • Control Protocol: OMNEO
  • D/A Conversion: 24 Bit linear, sigma-delta, 128x oversampling
  • Data Format: 24 Bit linear A/D and D/A conversion, 48 Bit processing
  • Digital Inputs: Omneo Network and AES3 (AES/EBU) format, XLR in/ thru connectors
  • FIR-Drive: Yes
  • GPIO Control Ports: 1 x 6-pole Euro block 2 control inputs (Uin max. 5 V) 2 control outputs (2x 100 mA) 2 reference outputs (+5 V, 200 mA; GND)
  • Internal Processing: Dual core DSP, 500 MIPS
  • Network Control (IRIS-Net): Yes
  • Sample Rate: 48 kHz
  • Sample Rate Conversion (SRC): 32ƒ??192 kHz, internal sample rate- converter
  • Signal-to-Noise Ratio (A-weighted): weighted) ADC: 120 dB typical DAC: 120 dB typical AES3: 128 dB typical Analog In to Analog Out: 116 dB typical dB
  • THD+N: < 0.002 %
  • Height: 2RU 3.17" (80.4 mm)
  • Width: 3.33" (84.7 mm)
  • Depth: 9.09" (230.8 mm)
  • Weight Net: 14.11 oz (400 g)


  • Model: RCM28
    Manufacturer: Electro Voice
    Processing...

    added to cart success.

    added to wishlist success.