Martin DMX 5.3 Splitter

$789.58 $450.00

Product Description

The Martin DMX 5.3 Splitter is the most economical protection for DMX controllers and devices. The main purpose of the Martin 5.3 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read from DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin DMX 5.3 Splitter will help to rectify the signal.

3-pin XLR Input and Outputs DMX Splitter / Booster
Opto-isolated DMX Output ports
Rack, truss and wall mountable

FEATURES

DMX Splitter / Booster
Opto-isolated DMX Output ports
DMX loop through port with built-in termination
3-pin XLR Input and Outputs
Optimized for Martin fixture firmware upload
Universal power supply
Rack, truss and wall mountable
Lightweight yet robust construction

SPECIFICATIONS

PHYSICALWidth: 220 mm (8.7 in.)Height: 45 mm (1.8 in.)Depth: 125 mm (5.0 in.)Weight: 0.9 kg (2.0 lbs.)

DATA SIGNALDMX: ANSI E1.11 (USITT DMX 512-A)Electrical standard: EIA-485Recommended cable type: STP (Shielded Twisted Pair)Recommended cable gauge: 22 or 24 AWG

CONSTRUCTIONHousing: AluminumFinish: Electrostatic powder-coated

CONNECTIONSData input: 3-pin XLR maleData throughput (not amplified or branched): 3-pin XLR femaleData outputs (optically isolated and amplified): 5 x 3-pin XLR femaleAC power input: 1.2 m cable tail with US-type (NEMA-5-15) power plug

ELECTRICALAC power: 100-240 V nominal, 50/60 HzTypical power consumption: 4 WPower supply unit: Auto-ranging electronic switch-modePower consumption figures are typical, not maximum. Allow for +/-10% variation.
THERMALMaximum ambient temperature (Ta max.): 55° CMinimum ambient temperature (Ta min.): -30° C

APPROVALSEU safety: EN 60950-1EU EMC: EN 55022, EN 55024, EN 55103-1, EN 55103-2US safety: UL 508US EMC: FCC Part 15 Class ACanadian safety: CAN/CSA C22.2 No. 14Canadian EMC: ICES-003 Class AAustralia/NZ: C-TICK N4241

INCLUDED ITEMS
4 x screws to join two devices for rack mounting
2 x L-brackets + 8 x screws for 19-inch rack mounting two Splitters (1U) or surface mounting
1.2 m (3.9 ft.) hard-wired power cable with US-type (NEMA-5-15) plug

ACCESSORIESInstallation hardware:
Half-coupler clamp: P/N 91602005
G-clamp:P/N 91602003
Quick-trigger clamp: P/N 91602007
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

RELATED ITEMSMartin™ RDM 5.5 Splitter: P/N 90758150

ORDERING INFORMATIONMartin DMX 5.3 Splitter™: P/N 90758140

FEATURES

SPECIFICATIONS

Subscribe to our newsletter