Furmans Contractor Series MiniPorts extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. Units may be daisy-chained and fully controlled via a Furman SmartSequencer, legacy Furman sequencer, third-party sequencers, via the Internet (with BB-RS232 adaptor and SmartSequencer), and/or control and automation systems. DIP switches and potentiometer allows customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches. Sequencing of duplex initiated remotely by standard analog triggering (remote terminal) or data link (SmartSequencing from CN-1800S or CN-2400S). The CN-20MP can shut itself off automatically when triggered by a fire alarm.
SmartSequencingTM: SmartSequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key.
Voltage Protection: Extreme Voltage Shutdown (EVS) safeguards from catastrophic under-voltage (under 80V sustained) or over-voltage (over 145V sustained) conditions. The EVS feature can be selectively enabled or disabled according to the preference of the user.
BlueBOLT Compatible: IP Control (Telnet or cloud-based BlueBOLT) via SmartSequencing (when connected to CN-1800S/CN-2400S with BB-RS232 Adaptor).
Diagnostic Lights: Diagnostic lights provide valuable system information including power quality.
20 Amp Output Current: 20 amp maximum current capacity.
DIP Switch Customization: DIP switches and potentiometer allows customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches.
AC Voltage Input Range: 90-139VAC, 50/60Hz
Maximum AC Current Rating: 20 Amps (No Breaker)
AC Cord: 3/12AWG, 10 feet, black, fixed, NEMA 5-20P plug
AC Receptacles: 2 NEMA 5-20Rs (1 duplex)
Operating Temperature Range: 5C (40F) to 40C (105F) degrees
Humidity Range: <90% rH (Relative Humidity)
Circuit Breaker: No Breaker
Front panel diagnostic indicators (LED): Power, Extreme Voltage, Primary Link, Secondary Link
Side Panel DIP Switch Features (with security cover): 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
Side Panel Potentiometer allows fine tune delay adjustments
Control/Status/Triggering (Rear Panel)::
Remote Terminal: +5-30VDC In, 12VDC (12mA) Out
SmartSequencing: Phoenix-type 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop - 1000 nominal)
Remote Terminal: Phoenix-type 5-Pin Connector With Screw Terminals; +12V, STAT, REM, GND, DLY_OUT (Class 1 Wiring)
Force Off: Phoenix-type 2-Pin Connector With Screw Terminals, FORCE OFF (Class 1 Wiring)
RS-232 Compatible: Yes, indirectly, when connected via SmartSequencing to a Furman Smart Sequencer with an RS-232 port
IP Accessibility: Optional IP control via Telnet, HTTP, or BlueBOLT when used in conjunction with SmartSequencing
Voltmeter: Available with SmartSequencing Ethernet option, °± 2VAC accuracy
Ammeter: Available with SmartSequencing Ethernet option, °±1A accuracy
Power Consumption (No Load): 10 Watts
Safety Agency: CSA, RoHS Compliant
- AC Undervoltage Protection: EVS, 77VAC+/-3VAC
- AC Overvoltage Protection: EVS, 140VAC+/-5VAC
- AC Overvoltage Reset Modes: Enabled and disabled (configurable via DIP Switch #9)