Pro Audio and Lighting
EUR
USD

0

QSC 2000 Watts 2 Channel Contractor Power Amplifier

$820.00

Commercial Power Amplifier. Features: ?Flex-Use? loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems ?Flex-Use? input connectivity choices including actively balanced barrier strip, XLR, or ¬" TRS ?Flex-Use? output connectivity choices...

Qty:

Commercial Power Amplifier.

Features:

  • ?Flex-Use? loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems
  • ?Flex-Use? input connectivity choices including actively balanced barrier strip, XLR, or ¬" TRS
  • ?Flex-Use? output connectivity choices include NL4 Speakon? and detachable terminal block
  • Rack mountable with chassis less than 16" (40.6 mm) deep
  • 1-dB recessed, detented gain controls for fast, accurate, and repeatable settings
  • Tamper-proof security cover for gain controls
  • Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection
  • Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool
  • Specifications:
    Stereo Mode (both channels driven)

    8Ω FTC 0.1% THD
    8Ω EIA 0.1% THD
    4Ω FTC 0.1% THD
    4Ω EIA 0.5% THD
    2Ω EIA 1% THD

    70V Direct EIA 1% THD
    100V Direct EIA 1% THD

    FTC: 20 Hz–20 kHz after preconditioning
    EIA: 1 kHz
    260 W
    300 W
    400 W
    500 W
    700 W



     
    Bridge Mono Mode
    8Ω FTC, 0.1% THD
    8Ω EIA, 0.1% THD
    4Ω EIA, 1% THD

    70V Direct Drive EIA, 1% THD
    100V Direct Drive EIA, 1% THD

    FTC: 20 Hz–20 kHz after preconditioning; both channels driven simultaneously
    EIA: 1 kHz
    800 W
    900 W
    1400 W

    1200 W
    600 W


     
    Signal to Noise (20 Hz–20 kHz, 8Ω) > 100 dB
    Input Sensitivity into 8Ω 1.14 V (+3.4 dBu)
    Max Voltage Gain 40× (32 dB)
    Output Circuitry Class AB
    Current Draw (pink noise program)
    Typical, 1/8 power 4Ω, 120 V
    Typical, 1/8 power 4Ω, 230 V
    Severe, 1/3 power 4Ω, 120 V
    Severe, 1/3 power 4Ω, 230 V

    5.4 A
    2.7 A
    9.6 A
    4.8 A
    Distortion (SMPTE-IM) < 0.01%
    Distortion (typical)
    20 Hz–20 kHz: 10 dB below rated power
    1.0 kHz and below: full rated power

    < 0.03% THD / 4Ω and 8Ω
    < 0.03% THD / 4Ω and 8Ω
    Frequency Response 20 Hz–20 kHz: ±1 dB; -3 dB points: 5 Hz and 50 kHz
    Damping Factor (1 kHz and below) > 300 at 8Ω
    Input Impedance 10 kΩ unbalanced, 20 kΩ balanced
    10 V rms (+22 dBu)
    Cooling Continuously variable-speed fan, rear-to-front air flow
    Connectors (each channel) Input: Active balanced; barrier strip, XLR and ¼" (6.3 mm) – TRS tip and XLR pin 2 positive
    Output: Detachable terminal block and Neutrik™ Speakon™
    Controls Front: AC switch, Channels 1 & 2 gain knobs
    Rear: 10-position DIP switch
    Indicators Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED (1 per channel)
    Amplifier Protection Stable into reactive or mismatched loads
    Load Protection On/off muting, AC coupling (CMX 300Va and CMX 500Va), triac crowbar (CMX 800Va and CMX 2000Va on each channel)
    Power Requirements 120 or 230 VAC, 50 – 60 Hz
    Dimensions (HWD) 2 RU models
    3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears
    Weight - Net 40 lb (18.2 kg)
    Weight - Shipping 46 lb (20.9 kg)
    Processing...

    added to cart success.

    added to wishlist success.